What are the key points in debugging fast doors?
The fast door is a fast lifting isolation door, generally used in the chemical industry, supermarkets, electronics factories, logistics and warehousing and other industries. Debugging after installation of the rapid door is very important.
1. Upper and lower limit debugging and detection First, let the door body be in a stationary state, press the up button, and the door body will move upward. After the buffering stops completely, judge whether the lifting height meets the requirements. If the requirements are not met, please debug again; press the down button, wait for the door to completely stop falling, and observe whether the end of the door fits naturally.
2. Test the performance of the emergency stop button. During the door operation, press the emergency stop button and observe whether the door stops immediately.
3. Automatic opening function debugging uses the movement of vehicles and people to simulate the actual situation and observe whether the door can be opened in time and whether there is no dead-end signal coverage at all angles.
4. Debugging of infrared anti-smash performance. When the infrared beam system is cut off during the descent of the door, will the door rebound and rise in time? During the test, please pay attention to your own safety.
本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834