When planning the layout of your home, the choice of doors directly affects the convenience of daily life.
Especially for a door opening with a width of 1.2 meters, it seems reasonable to choose a double door, but there is a small hidden danger!
Calculate the actual passing size:
Door opening width: 1200mm
The left and right installation gaps are 10mm each: 20mm in total
The width of the left and right door frames are 45mm each: 90mm in total
The sub-door width is approx. 300mm (closed)
Daily passing size of double and double doors = 1200 – 20 – 90 – 300 = 790mm
Single door passing size: 1200 – 20 – 90 = 1090mm
In other words, when the sub-door is closed, the actual available passage width is only 790mm, which is wider than the 1090mm of a single door. Much narrower.
This not only affects the comfort of daily entry and exit, but also requires frequent opening and closing of the sub-door when moving large items such as furniture, which is quite inconvenient.
So, how to solve this problem?
Customized large single door: This is a good choice, which can maximize the use of the width of the door opening and provide a wider passage space.
Note the restrictions: If the door opening exceeds 1.3 meters, it is not recommended to make a large single-opening design. At this time, reduce the door opening or continue to chooseA mother-child gate would be a better solution.
Remember to make the best choice based on actual conditions to make your home both beautiful and practical! ✨
本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834