Friends who have just started decorating may think that the purchase of \”doors\” is relatively easy, but when it comes to actual purchase At the critical moment, I discovered that there are actually so many doorways in a gate. In addition, in recent years, Internet celebrity barn doors, invisible doors, and thin-frame glass doors have appeared… In addition to appearance, what other knowledge points do we need to get? If you don’t finish reading this article today, remember to collect it first!

Usually, in our homes The \”doors\” are divided into entrance doors and interior doors. We have talked about the purchase of entrance doors before. This way, your family will feel at ease, your neighbors will applaud, and thieves will run away. Today we will mainly take an in-depth look at interior doors.

In this article you will GET

door, what is the How many faces?

In addition to appearance, soul hardware is also very important

Recommended door selection for different spaces

If you don’t understand these, you will suffer a loss

How many faces does the door have? —— Yanzhi Zhengyi

Indoor doors can be divided into swing doors, sliding doors, folding doors, etc. according to the opening method. strong>Material structureIt can be divided into original wood doors, solid wood composite doors, plywood molded hollow doors, PVC doors, glass doors, etc. The opening method is easy to understand, so we won’t go into too much detail. We will focus on introducing the types of the latter, line up the door, and understand them one by one.

1. Original wooden door

01The exterior and interior are like a wooden door

This type of door is generally made of full-length wood, with no finger joints and no veneer, with clear and natural surface texture and good sound insulation; the door body adopts a mortise and tenon structure, so there is no need to worry about environmental protection. However, the price is high and the craftsmanship is tested. If the solid wood is not dehydrated in place, it will easily deform.

Image source Baidu Encyclopedia

2. Solid wood door

01 Brothers spliced ​​solid wood door

It can be simply understood as putting a layer of density board on the solid wood core to cover and paste the veneer. The solid wood door is glued at some junctions , if the glue used is poor, it contains a certain amount of formaldehyde, which is slightly inferior to the original wooden door in terms of environmental protection, but is more practical.

Source: unsplash

02Solid wood composite door with different appearance

The \”recombination\” here does not mean that you and your ex reconcile the old relationship. It is simpler and easier to understand, and it is a variety of Material combination. You can use a formula to remember:

Solid wood composite door = frame(Solid wood keel frame)+ inner core(solid wood strips/plywood/honeycomb cardboard) +Finish(density board)+Solid wood veneer

How to identify the quality of this kind of door?High-quality solid wood composite door, inner core wood The strips and keels are all made of the same kind of wood, and there will be expansion joints inside, so the performance is relatively poor. The interior of the solid wood composite door may be filled with honeycomb cardboard.

Picture source network

Generally speaking, solid wood composite doors are the mainstream product on the market. Although they are afraid of water and tide, their advantages are more prominent: Not easy to crack and deform, soundproof and environmentally friendly, and has the feel of solid wood. darkmode-color: #39C4C4;\”>03BBQ Xishi paint door

The paint door is simply a multi-layer primer, topcoat, and then heated and dried in a drying room. Density board is often used as the base material. , the back is melamine, the process is complex, the processing cycle is long, the overall effect is good, and it does not retain oil stains. It is generally divided into bright, matt, and pearlescent. It has the most visual impact, is easy to clean and care, and has good waterproof and moisture resistance.

However, steel wire balls cannot be used for scrubbing. Once damaged, it is difficult to repair(Complex process), so it is not recommended for kitchens with a lot of fumes.

Source: unsplash

04Green paint-free door

As the name suggests, there is no spray paint. Generally, the PVC plastic film is fixed on the surface of the board by high temperature and high pressure. The colors are rich and can meet most people\’s aesthetic needs and green environmental protection requirements. The craftsmanship is simple and the price is great! The only drawback is that it has poor moisture-proof performance and is easy to open and deform.

Source: unsplash

05Strengthened wooden door with soft exterior and inner steel

Reinforced wooden door is also called ecological door or ecological wooden door. Its structure is basically the same as solid wood composite door, but Steel square tubes are added inside to prevent deformation, and the ecological door is completely sealed without leaving any ventilation holes, making it more moisture-proof

06 Machine-formed molded wooden door

The molded wooden door is made of artificial forest wood, which is peeled, sliced, screened, ground into dry fiber, and mixed with phenolic glue and paraffin, at high It is molded under high temperature and pressure. The middle is hollow, so the sound insulation effect of the molded wooden door is relatively low.

3. Other materials The door

Doors of other materials

01PVC door

PVC door is a plastic door that does not need to be repainted. Using amorphous materials as raw materials, it has extremely high performance in terms of resistance to oxidation, resistance to strong acids and resistance to reduction.

PVC doors have a short construction period and are green and environmentally friendly, but they are prone to moisture and deformation, so they are not suitable for bathroom doors.

02Aluminum-magnesium alloy door

The main component is aluminum, which is mainly used for balcony doors.Usually only used for Glass Door Frame. However, it is not strong enough, and the frame cannot be made too thin. The narrowest one can only be 4cm. It also needs to ensure a certain grid, otherwise it cannot support the weight of the glass.

Source: unsplash

03Stainless steel door

Please mark the key points if you want to make a small thin frame glass door that is famous on the Internet. Remember to choose stainless steel, but if you want to make it below 2.5cm The ultra-thin frame needs to be carefully examined to determine whether the merchant is competent, because it is quite a test of craftsmanship.

Image source: Pexels

04Glass door

Glass doors are divided into flat-opening and push-pull types. The flat-opening type requires a stainless steel door frame to facilitate fixing the loose leaf, and the push-pull type requires the installation of hanging rails on the ceiling.superior.

Image source: Pexels

05Invisible door

Of course, in order to solve the problems of aesthetics and feng shui, many people will also consider invisible doors. The most mainstream method of invisible doors at present is to make the entire wall into a decorative panel to ensure uniformity. Because the decorative panel itself also has gaps, it can be connected with the door gap. It is very natural to make an invisible door in this way.

Of course there are invisible doors that are hidden in furniture or transformed into art installations. If you want to know more about invisible doors, please leave a message in the comments and we can talk about it separately!

Picture source: Owner @sunny

In addition to appearance, we also need to look at the soul – hardware accessories

A complete set of doors in home decoration mainly consists of: door frame, Composed of door leaves, door shafts, door handles, door locks, thresholds, etc., the price of the entire set of doors should be included in the quotation ofthe door.

However, when decorating, generally everyone pays more attention to the door itself. What many people don’t know is whether the door is good or not. Ease of use and long service life are determined by the door hardware.

Image source: Pexels

Door hardware accessories mainly include door locks, hinges, seals, door handles, door suckers and moving slides

1, door lock

Door locks

There are not many types of door locks, which can basically be divided into single lock cylinders and double lock cylinders.

Single lock cylinder: can only be locked with a key on one side of the door.

Double lock cylinder: Both sides of the door can be locked with keys.

Although the double cylinder lock has good anti-theft properties , but there is also a certain danger. Once one side of the door is locked, it must be opened with a key regardless of entry or exit. Therefore, in the event of an accident, escape will be difficult. Generally, it is recommended to purchase a single lock cylinder for household interior doors.

Image source: Pexels

Bedroom doors and living room doors are not often closed or locked. You can buy ones that are guaranteed to open and close less often, usually 100,000 times. is enough, and Wei The door locks in the living room are opened and locked more frequently. You should buy a door lock with better quality and a higher number of opening and closing times. When purchasing, use the key to open it repeatedly to see the sensitivity of the lock cylinder spring.

TwoHinges

Mainly used for supporting and rotating opening and closing between door leaves and door frames. The specifications are generally between 25 mm and 150 mm, and the styles are various. There are many. In addition to ordinary hinges, there are also bearing hinges, spring hinges, core-pulling hinges, multi-function hinges, etc.

Photo source: Tmall Goodena Store

Normal hinge:There are several materials such as steel, copper and stainless steel, which have good bearing capacity. For general home decoration, it is recommended to choose stainless steel material, which is the most cost-effective.

Light hinges:Mostly narrow and thin , mainly used on some lightweight wooden doors, such as paint-free doors, molded doors, etc.

Bearing hinge: Each leaf plate shaft of the hinge is equipped with a one-way thrust forceOne ball bearing makes the door switch light and flexible. Currently, most hinges use copper bearings.

Multi-function hinge:When the account opening angle is less than 75 degrees, it has an automatic closing function. When it is at an angle of 75-90 degrees, it will stabilize itself. When it is greater than 95 degrees, it will automatically position itself. The hinge can Installed on the door instead of ordinary hinges.

三Door nozzle

Door nozzle is often ignored, but it plays a great role in preventing the door leaf from being hit hard. Door frame or wall. When purchasing, you should consider its impact and pulling force, and also pay attention to the stress of the walls and floor tiles that fix it.

fourSliding rail

The pulleys and tracks are the most important components of the sliding interior doorIt can be said that they are the \”soul\” of sliding interior doors. In terms of the materials selected, there are three main types of pulleys:Plastic pulleys, metal pulleys and fiberglass pulleys.

Image source: Pexels

Metal pulley: It is strong and easy to make noise during use.

Plastic pulley:Easy to wear and deform, poor flexibility, no anti-jump device, easy to derail when pushing and pulling, not very safe.

Fiberglass pulley：It contains roller bearings, which ensures smoothness and long-lasting wear resistance when pushing and pulling. Moreover, it has a box-type closed structure, so it is also effectively dust-proof and safer to use.

If you want to judge the quality of rails, pulleys and other accessories, the most direct way is to push and listen. It should be noted that although the bottom wheels of some sliding doors slide very smoothly, if you look closely, you will find that the bottom wheels have a greasy feel, which means that their smoothness is achieved by applying oil to the bottom wheels. This kind of bottom wheel is not only easy to be contaminated with dust , and once the grease dries, it will cause blockage and affect the sliding effect.

Recommended doors for different spaces

一Bedroom door, study door

Bedrooms and study rooms are recommended to give priority:Soundproofing +Doors with good thermal insulation. In terms of materials, you can choose original wood doors, solid wood doors, or composite doors according to your personal financial situation and decoration style. Considering the silent effect, swing doors are often chosen.

When purchasing, you need to check whether the door hinges are smooth and seamless, whether the switch is flexible, and whether there is no abnormal sound when opening the lock.

Image source: Pexels

TwoKitchen door, balcony door

If general kitchen conditions permitTwo-way sliding doors can visually connect the kitchen with the outside space, making the kitchen look more spacious and generous.

The total width of the door ranges from 1400-2000mm. If it is single-opening, you should pay attention to designing it according to the width of 700-800MM. Because some large appliances, such as refrigerators, are already 600mm in size and width, it is more difficult to fit them in if they are smaller.

Picture source: unsplash

As a passage extending outward from the indoor space, the balcony can also choose sliding doors or folding doors, taking into account For lighting and visual effects, you can choose glass material.

Image source: unsplash

It is generally recommended to use aluminum-magnesium alloy for sliding door profiles, which has good toughness and a thickness of more than 1mm. Do not ignore this when purchasing. The stability of the pulley. In addition, the floor rail design of no more than 5mm is not only conducive to cleanliness, but also ensures the safety of the elderly and children at home.

三 Bathroom door

Bathrooms have higher requirements for moisture resistance and privacy. Wooden doors are good-looking but have poor moisture resistance, so you can consider them Composite doors. It is best to use double decorative veneer back panels to achieve waterproof and moisture-proof effects.

Picture source: Homeowner @小六

If you look at it from a more economical perspective, you can directly choose plastic steel doors and aluminum alloy doors, which have good waterproof performance.

If you don’t understand the acceptance, the disadvantages are right in front of you

It takes 6 months to decorate, only 6 minutes to accept, and then move in 6 The diva may start to regret it, the door cracks are too big, air leakage and light leakage, the bathroom door cannot be locked, the study door creaks… Don\’t panic, here is the secret to acceptance:

Image source: Pexels

一Appearance is the first priority

The appearance should be beautiful, and the surface paint film should be smooth and bright; the material used for the door cover should be coordinated with the wood and color of the door leaf.

二Tidyness is necessary

The assembly of the door pockets must be tight, diagonally Be sure to align. Generally, the error of a door pocket less than 2m is less than 1mm, while the error of a door pocket >2m is less than 1.5mm.

When we accept the door leaf, we must check whether it is flush with the surface of the door cover. At the same time, we must also pay close attention to the gap between the door leaf and the door cover. Gap, Generally, the lower gap of the door leaf should be kept at 6 to 7 mm.

三Each widgetStick to your position

Hinges must be positioned accurately and installed securely. If the hinges are not straightened, the door and window sashes will not match the frame cover.. The door lock must open and lock smoothly, and the two parts of the lock on the door leaf and door frame must match.

Picture source: Pexels

Understand the above introductory knowledge and want to know more about \”door\” decoration inspiration Please click on the link below:

Dislike the door in your home that is too boring? These practical methods instantly upgrade your style

Internet celebrity barn doors also have new ideas? There is always one of the 9 options that suits you!