Industrial development has grown significantly in recent years, and there is also a huge demand for corresponding factory doors. Lift doors are a frequently used exterior door for industrial factories. They not only have good sealing properties, but also have good thermal insulation properties.
Industrial lifting door parameters:
1. Motor: Use Pioneer or other brands (including imported) motors, special opening motors for industrial lifting doors.
2. Door panels: Industrial door panels are designed and produced by ourselves and have very good thermal insulation effects.
3. Transparent window: A small transparent window can be opened on the door panel of the industrial sliding door to increase the light transmittance inside the workshop.
4. Small door: In order to facilitate personnel to enter and exit the workshop and increase the service life of the industrial door, a small door can be opened to facilitate personnel entry and exit.
5. Safety device: The industrial lifting door is equipped with triple safety protection such as airbag protection, wire rope breakage protection device and torsion spring breakage protection device to ensure the safety of people and goods. Advantages of lifting doors:
6. Insulation: Because the door panel of the industrial lifting door is 4 cm thick and filled with thermal insulation polyurethane material in the middle, it can maintain a temperature difference of 15 degrees between the inside and outside of the workshop.
7. Wind resistance: Industrial lifting doors can withstand level 11 winds.
8. Durability: The structure of the industrial lifting door is not easily damaged. When the button spring reaches the service life (40,000 times), only the torsion spring needs to be replaced and it can be used again.
9. Convenience: Xufeng (http://www.xufengmy.com) industrial sliding doors can be opened with one click. No one is required to hold down the switch or manually assist the door.
本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们：609448834
