1. Roof Garden Maintenance

Roof gardens are built on flat roofs, platforms, etc. of buildings. Their ecological environment is worse than that of ground flower gardens. Therefore, it is more difficult to maintain flowers and trees on the roof in summer than on the ground. Some experiences have been summarized and are now introduced as follows for owners’ reference.

1. Fertilize early according to phenology

Roof garden underlay The surface is a cement floor, which has strong heat absorption capacity and early plant phenology. To master this characteristic, topdress flowers and trees in early spring, apply thin fertilizer frequently, and alternate root fertilization and foliar spraying. In this way, the flowers and trees in the roof garden enter the peak growth season earlier than the flowers and trees on the ground, and the flowering flowers and trees bloom earlier and have a longer flowering period. No root fertilization during high temperature seasons, when flowers and trees are short of fertilizer, spray thin fertilizer or micro-fertilizer on the leaves in the evening, which is beneficial to the growth of flowers and trees.

2. Shading and cooling

Roof Garden In summer, the light is strong, the temperature is high, the wind speed is strong, and the transpiration of flowers and trees is large. Sunburn is prone to occur in summer, and branches and leaves are scorched or dry. In order to prevent flowers and trees from being damaged in summer, should take measures in advance to prevent summer . Windproof shading is carried out in early April, and the greenhouses and greenhouses are directly covered with shade nets; where there are no greenhouses or greenhouses, windproof wire mesh and peripheral shade nets (with a shading rate of more than 70%) are fixed. When the high temperature comes, water every morning and evening depending on the weather.Spray mist water on the leaves several times , to create higher air humidity and reduce high temperature.

3. Replenish basinsoil

Due to frequent and continuous watering, a small amount of pot soil is lost, the volume shrinks, breaks, and the thickness of the planting layer is insufficient. When it is found that there is little soil in the flower pot,Replenishing pot soil in time is beneficial to the growth of flowers and trees.

4. Weed often, keep potted flowers and gardens clean, do a good job in preventing and controlling pests and diseases, observe the growth of flowers and trees in a timely and at any time, and do a good job in management work reasonably.

2. Maintenance of wrought iron doors

Wrought iron door is an architectural decorative art,

It comes from Europe,

It is a traditional European handicraft product.

The style is simple and elegant,

Developed to this day,

The iron door incorporates more simple and fashionable elements,

The artistic level has been greatly improved,

The appearance looks more beautiful.

Its function has also evolved from the original anti-theft to,

Today’s diverse features,

In today\’s new rural areas, communities and communities,

The most common in villa areas.

1. Type

Old style:This type of wrought iron door generally has more complex patterns, the materials used are relatively thick, and the color of the door will also use some deep antique colors.

Modern type:This type of wrought iron door has a modern style and a relatively simple design. The materials used are also some lightweight square tubes, which are simple yet modern and beautiful.

2. Structure

Solid door:This kind of door uses a square tube as the overall frame, uses an iron plate as the bottom plate, makes the door a solid door, and then uses some iron accessories to inlay it on the door surface. This kind of door is very practical. However, it is not beautiful enough and consumes a lot of materials. It is generally used for private courtyards or other small-sized doors.

Barrail door:This type of door uses larger-sized square tubes as the frame, and then uses iron fittings directly inside to inlay and splice. This kind of railing door is relatively transparent and very beautiful, and the materials used are also Relatively few, generally used to make larger doors such as community gates and park gates

3. Maintenance

Avoid collision:This is the first thing to note after purchasing the wrought iron door. The wrought iron door should be transportedHandle with care;The place where the wrought iron door is placed should be a place where hard objects are not often touched; once the place is selected, it should not be changed frequently; the wall where the wrought iron door is installed should also be kept flat to make the installation of the wrought iron door stable and smooth. , if it shakes unstable, the wrought iron door will be slightly deformed over time, which will affect the service life of the wrought iron door.

Clean and dust removal:For friends who love cleanliness,It is best to choose pure cotton knitted fabrics The product is a rag, wipe the surface of the wrought iron door. For dust in the depressions and relief patterns on the wrought iron door, it is best to use Fine soft wool brushCome and dust.

Stay away from acid:Acid acid, which has a corrosive effect on wrought iron doors, is the \”number one killer\” of wrought iron doors. If it is accidentally stained on the wrought iron door, the stain should be rinsed immediately with clean water. , then wipe dry with a dry cotton cloth.

Isolate moisture:Wrought iron doors should be installed in areas that are more ventilated In places where moisture will cause premature corrosion of metal, chromium plating will cause peeling, etc., affecting the use of the door.

Remove rust:If the wrought iron gate is rusty, do not polish it with sandpaper on your own. If the rust is smaller and shallower, you can use itCotton yarnDip engine oil on the rusted area, wait for a while, and wipe with a cloth to remove the rust. If the rust has expanded and become heavier, please ask the relevant technicians to repair it.

Wrought iron gateIt is artistic and durable, it is more suitable to install it in the courtyard, but you should also pay attention to maintenance at ordinary times, otherwise it will affect the life of the door. However, as long as you follow the five tips to maintain the door, it can be used for a long time.

3. Wood maintenance (preservative wood)

Anti-corrosion wood has always been used for outdoor flooring,

Ideal material for landscaping and facilities,

is favored by garden designers.

Anti-corrosion wood,

It is ordinary wood that has been artificially added with chemical preservatives,

Make it corrosion-resistant,

Moisture-proof, fungus-proof, insect-proof and ant-proof

Anti-mildew and waterproof properties

The types of antiseptic wood are Many kinds,

The most commonly used one is Pinus sylvestris antiseptic wood,

Southern pine antiseptic wood, Douglas fir antiseptic wood,

Eucalyptus antiseptic wood, pineapple grid antiseptic wood, etc.

1. Wooden platform

The wooden platform is for usersliving, leisure and entertainment, Work and enjoy the landscapeA place. Wooden platforms were mostly used for drying, entertainment, docks, military and other purposes in ancient times. In modern times, they are mostly part of the garden landscape and a place for personal courtyard leisure. Generally, when making wooden platforms, there are More than a dozen colors are available to match different styles.

2. Railings

In addition to being used for viewing platforms and stairs, wooden railings can also be used to divideVegetation communitiesand functional areas.

3. Frame

The gallery can be more than justMatch plantsto enclose a comfortable landscape leisure space, which can also be used Infunctional areadividing and decorating such as parking racks, barbecue bench racks, etc. natural styleIn a small courtyard, you can also consider setting up an arched flower stand or a triangular flower stand to effectively utilize theright-angle space, it can not only create a landscape leisure space, but also save space.

4. Pavilion

There are many pavilions in the courtyard. There are four-corner pavilions and six-corner pavilions. The four-corner pavilions are suitable for modern and new Chinese styles, and the hexagonal pavilion is suitable for European style courtyards Muten pavilions are often surrounded by vegetation, fish ponds, rockeries, etc. To create a rest area that integrates landscape functions.

5. Equipment room

The equipment room is mostly used to place outdoor units such as air conditioners, which canPrevent erosion from rain and storm . The equipment room is mostly composed of wooden grids, wooden falling boards, wooden louvers, etc.

6. Maintenance

Required inConstruction will be carried out at temperatures above 8 degrees. Wood mustdry, maximum moisture content No more than 15%. The wood must be marked withGand with fine sandand wipe until the surface is smooth. If there is any For fiber, you can lightly sand it with wood sandpaper p240 or above before using wood oil.Need to stir thoroughly, no need to dilute, such as wood oil with high viscosity , you can also add a small amount of special diluent, the amount should not exceed 10%. The refresh cycle of antiseptic wood oil is generally once every 1.5-2 years.

4. Outdoor furniture maintenance

Outdoor furniture for garden style

The impact of the design is No doubt about it

Can be the icing on the cake,

It can also destroy the overall design.

So many qualified friends

will be customized according to yourself A set of furniture ensures a consistent style.

1. Wood rattan

After spending such a huge cost, we must know how to take good care of it. Generally speaking, outdoor furniture shouldMoisture and moisture-proof but also sturdy and not easily damaged. Wooden, rattan and steel are popular choices. These finished products generally have a long service life, and proper maintenance can extend the use time of the furniture.

Generally, wooden rattan and bamboo products are processed during the manufacturing processDry and antiseptic, made from natural, green and environmentally friendly materials, and the natural color is very suitable for use in the garden.

After product processingNot easy to discolor, anti-mold, insect-proof and anti-corrosionEfficacy so it isMost people\’s first choice. The disadvantage is that over time, the furniture will be affected by the environmental climate, and high temperatures will make the furniture easy to crack, so it is best to use this type of furniture in a dry and ventilated environment to avoid direct sunlight.

A humid climate will cause furniture to become infested with insects, mold, and bacterianeeds to be cleaned from time to time, so Proper care is necessary. When cleaning, wipe it clean with clean water or salt water, and apply a layer of it appropriately after it is air-dried. Varnish for protection.

2. Iron and steel

Now more and more people like to choose steel home products,Steel product furniture has become the mainstream of furniture selection. Because of its characteristics, it can create a variety of special styles of furniture,Bright colors, fashionable styles, and modern metal texture, compare span>Adapt to the trend, and compared with traditional furniture, it hasLightweight, durable, fireproof and waterproofFeatures, easy maintenance, no need to worry about insects, mold and other problems, saving time and effort.

But even though it has so many advantagesThere are also shortcomings.

(1) Easy to rust.Especially in the summer when the climate is humid, the moisture will cause the steel to rust and fall off;

(2) Easily corroded by acid liquid.Due to its own characteristics prone to chemical reactionsCare should be taken to avoid leakage of chemical liquids to avoid damage;

(3) Avoid styling damage. Steel products are favored because of their versatile shapes, mainly because their materials are easy to design and manufacture, and they are consistent with At the same time, you need to pay attention to the damage to furniture caused by daily bumps. This type of furniture also requires a dry and ventilated environment. Avoiding sunlight will increase the service life of the product.

Different furnitureThe combination will produce different effects, so there is usually not only one kind of furniture in the home. No matter what kind of furniture it is, it should be taken care of and not deliberately damaged so that it can function well.

Copyright statement: The pictures and texts are from courtyard garden design and are only used for For learning and communication, the copyright belongs to the original author. If there is any source labeling error or infringement, please contact the editor and we will promptly correct and delete it.

Read thousands of books and travel thousands of miles. Reading Travel is honored to share this article with you! Not practical, not creative. If you have good material cases, you are welcome to leave a message below to share~