Conflicts between customization and door frames are hard to guard against

Renovation is complicated and complicated. It is not easy for a decoration company to achieve the perfection of the owner. Even when the decoration company completes the large package, you will still find unsatisfactory places. What\’s more, some decoration agencies do it, and some If the owner does it himself, there will be too many mistakes and regrets.

So it is often said that if you find an institution that you can rest assured and worry about, you will not have to worry about anything and they will solve any problem for you. You think you are looking for a bargain, but in fact you are not. Instead, you artificially complicate simple things, causing both parties to feel tired and make constant mistakes.

For example, the conflict between whole-house customization and wooden doors,The general order must be to install customization first, and then install the wooden doors and baseboards at one time; When actually measuring and designing, all conflicts must be taken into consideration and need to be anticipated and avoided in advance, otherwise there will most likely be rework.

▲As shown in the picture, a common conflict point is that there are door covers from other rooms on both sides of the bathroom cabinet.Not taken into account when measuring and designing, causing the drawer to only open half way. This kind of mistake will not make it unusable, but it always feels like a pity.

▲As shown in the picture, the correct approach should be when there is a drawer, Add strips where it conflicts with the door cover, so that the drawer can avoid the door cover during the opening process and achieve the full opening function

▲As shown in the picture, the bathroom cabinet customization does not consider the position of the door cover at all, and the door cover is installed in the wrong order, resulting in the forced installation of the bathroom cabinet, which looks like the picture. According to reason, If this problem is found, the bathroom cabinet needs to be returned to the factory and remade. This responsibility is entirely the responsibility of the customized bathroom cabinet.

▲As shown in the picture, if this situation occurs, it must be the responsibility of the whole house customization. The position of the door pocket is not considered at all in the early stage

▲As shown in the picture, if the bathroom cabinet is not deep enough for the undercounter basin, Make it deeper and shallower, and use a countertop basin to avoid conflict with the door frame, to achieve perfect functions and effects

▲As shown in the picture, the cabinet countertop conflicts with the door cover. In fact, if everyone does not worry about decoration or is an amateur, there will be no problem. Saved.

First,The kitchen door does not need to be double-wrapped, single-wrapped is enough , \”There is no need to make a separate door cover when installing metal doors in the kitchen and bathroom.\” In this way, the tiles are pasted out of the door opening, which just widens the wall on the cabinet side, making up for the problem that the wall is too short;

Second, measure If the door size of the cabinet is too narrow, you need to confirm the installation method of the door to see if the size is feasible, rather than blindly customizing it. Otherwise, this kind of thing is entirely the responsibility of the cabinet customizer, and the owner is not responsible.

▲As shown in the picture, the kitchen door was mistakenly used as a double cover, resulting in the door cover being unable to be installed after the wall cabinet was installed. , if the tiles are pasted in the door opening, there will be no such problem with the outer door

▲ Let’s not talk about appearance for now, The order is wrong, from measuring to installation, to customization, no one is right. First of all, the customized one must be installed first. The door is so small when measuring, so why don’t you ask the owner if he has installed a door cover?

If there is this, you need to avoid the door cover installation, or do not use the door cover to increase the depth of the shoe cabinet; now the design of the shoe cabinet completely suppresses the door cover, and the meaning of the door cover is zero.

▲As shown in the picture above, it only makes sense to press the door cover. Because the door is not a shoe cabinet, but a shoe changing stool. At this time, every time you enter the door to change shoes, your hand must touch the exposed wall, and at this time It is protected by a door cover and will not stain the wall. The door cover is effective at this time. \”Is it necessary to use a door cover at the entrance?\”

▲If you can use your brain more, you can also use bevel processing. At this time, it doesn’t matter whether you need a door cover or not. You can use the side panels to protect the wall entering the door

▲or As shown in the picture, if you want a door cover, you don’t need to change the shoe stool. At this time, the shoe cabinet at the door can be sloped to avoid the door cover position

▲Or as shown in the picture, do not enter the door cover directly, ensuring the maximum depth of the shoe cabinet and ensuring storage is the most important

▲As shown in the picture, the outside of the cabinet is used as a shoe cabinet, but the entry door cover is not paid attention to at all. As a result, if the right cabinet door is installed normally and conflicts with the door cover, it will not work at all. If it cannot be opened, it is still a customization problem. If you encounter this kind of problem, you must add a strip of the same color as the cabinet door on the right side of the wall to ensure that the right cabinet door can be opened ninety degrees

▲The cabinet door is installed, but it is completely blocked by the door cover and cannot be opened at all. This is a problem with the custom measurement design. It was returned to the factory and modified again

▲The picture is still the same. The wall cabinet ignores the position of the door cover, which later results in the inability to open it to 90 degrees. Although it does not affect the use, it always feels awkward. , if this situation is notified in advance, as long as the owner can accept it

▲This is my own problem. Obviously there is a door cover and I need to customize an ultra-narrow bathroom cabinet with a countertop basin, but I have to buy a finished product. Not only does the door cover protrude, but there is also an ugly gap