1. The power supply is a bit The motor is locked, press the stop button of the transmitter to unlock, and then detect whether the insurance pipe is burned. In addition, after the indicator light on the line board is on, then the power supply has arrived. , Find the thread of the three words with the limit switch with the line of the limited switch. After removing it, the door is directly powered out, and then the door is motionless. If the door is moved, it is the magnetic ring switch on the wire board. Failure. If the three wires of the magnetic ring switch are pulled out, there is still no response, it is likely that the copper foil on the back of the line board is burned. This seems to be checked.
2. The motor has electricity but the motor cannot be started: you need to replace the capacitor, the capacity of the capacitor is reduced, and this small failure should be ruled out after replacement.
3. If the transmitter is getting closer and closer when operating the transmitter, you need to replace the launch battery.
The above is the explanation of the small fault treatment method of the giant light transition door motor, If you want to know more about the relevant content of Julu Motors, please pay attention to Julu Smart Gate Control.
本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们：609448834
