To the top, is it beautiful?

The answer is no controversial! Simple and atmospheric, the lines are neat, these descriptions are not exaggerated at all! Therefore, the designer and home bloggers can be quickly taken into the altar!

But in reality, people around you rarely do one to the top? I can even hear it occasionally.

In this issue, we will talk about the custom cabinet of\” one door to the top \”. After talking about the above doubts, it will be solved. If you have planned decoration, you can help everyone to avoid pit!

What is the door to the top?

It’s easy to understand. The door of the cabinet is not divided into two sections as shown in the picture above, but is one door from foot to top.

The best results are shown in the picture above. Details such as handles, ceilings, skirting boards, side closing strips, light panels, etc. have all been processed accordingly, which is called one door to the top.

The poor effect is as shown in the figure Rollover cases are not handled at all, which is also called one-door-to-top.

In addition, it is not limited to wardrobes. Entrance cabinets, TV cabinets, and balcony cabinets can all be built with one door to the top. !

How to achieve the best results?

Specifically, how do we achieve the best results? Talk.

On the one hand, it provides a reference for those who want to do one course to the top. More importantly, if you understand how to do it, you can have a deeper understanding of \”one course to the top\”. , which will help you gain insight into its advantages and disadvantages!

To have better results, you need to focus on the following5 details to deal with:

①Handle

The best effect is to get rid of the handle completely and use the rebounder directly. After that, the cabinet is opened and closed. , pops up when pressed.

The effect that is comparable to that of the rebounder is: the milling groove handle. To simply understand, it is to make a small groove on the cabinet door. Generally, the cabinet door is opened in half. One milled groove is enough. From then on, the way to open and close the cabinet was to pull out the slot.

Slightly inferior is the handle. The handle is made weaker, which is the so-called invisible handle. In fact, if it is done well, it can also produce good effects.

Made the handle to have a stronger presence. Although the effect is not good, it is more convenient to open and close.

Of course, it also needs moderate, the presence is too strong, it will inevitably make the handle become the\” mouse shit \”and seriously turn over the car.

② Treatment on top

The best treatment solution is: first ceiling, and then the top sealing board that should have been exposed outside to make a hidden design. .tiaoimg.com/TOS-CN-I-QVJ2LQ49K0/EF5568A92C804E0E8E1589708 B8DA0 ~ TPLV-Origin-Web: GIF.JPEG? AIL & LK3S = 953192F4 & X-EXPIRES = 1738293856 & X-Signature = 4ezneom4njkhszjqn4ry3tdkm%3d \”/> p class = \”pgc-img-caption\”>

▲Cross-section view of the top processing solution

Of course, without a suspended ceiling or a hidden ceiling board, the effect will be slightly inferior.

There is even this kind, where the top sealing plate conflicts with the corner decorative line, and the car overturns.

③ skirting board Processing

The best effect is: hidden footboard, the above-mentioned top plate version is the same, the door pressure of the cabinet door pressure Knit

The effect of the effect;

Of course, there are this type of flipping, which was originally hidden, but the cabinet door was short. One-time

\”Data-COLOR-TT-Darkmode-B3B3B3\”> ④ Course with the wall

The best way to close the effect is to find it on the wall, and then directly install it vertically vertically with vertical installation. Close the mouth, a narrow one, is the thickness of the board 18 mm. 4CE ~ TPLV -TT-Origin-Web: GIF.JPEG? _IZ = 58558 & from = Article.pc_detail & LK3 k0hvpudhje%3d \”/>

p data-track = \”36\”>

Of course, there are the following I had no choice but to install the closing strips horizontally and vertically, and the effect was a little strange, like SpongeBob SquarePants with a piece of his head removed.

⑤The side that is not against the wall

If one side is against the wall and the other side is not against the wall, the other side is also required. Do processing:

Personally, I think the best effect is to use a light panel. The material of the cabinet door and the side is more unified.

But some people think that the effect of making false walls is better. The reason why I don’t like it is because the closing of the baseboards is more troublesome.

Of course, there is also the one that does nothing and directly exposes the cabinet. This is the one with the worst effect.

Okay, I’ve finished talking about all the details of one course to the top.

Now, let’s assume that we want to achieve the best results from one door to the next. Best, take a look and see what advantages and disadvantages it has.

One-stop advantages and disadvantages

The biggest advantage is that It looks good, stretches the space, and makes the floor look taller. This is the ultimate reason why most people choose one door to the top!

As for practicality, I thought about it for a long time and came up with one: there is no handle, just a light dusting or wiping can complete the hygiene.

There are many shortcomings, let’s go through them one by one:

① Complex process, frequent rollover

Don\’t look at it, it\’s what I mentioned above. There are really a lot of designers and carpenters who can\’t do it.

So, in addition to the above mentioned rollovers, I can also catch a lot of them and talk about a few typical ones.

Inaccurate size

What is most likely to happen is as shown in the picture, the cabinet door is shorter.

Designers generally shorten the size of the cabinet door slightly in order to avoid the door rubbing against the top surface as shown below.

But it may be that it was shortened twice by two people, or it may be that the designer is inexperienced, or it may be due to fear of uneven ground. If it is shortened too much, then As a result, many people pretend to have a door that reaches the top, but the top is too short.

The top of the wall is not leveled

This is the sequelae of insufficient basic decoration!

It is widely found in Chinese homes. There are uneven floors, which cause different shadows, and there are also the uneven walls that we mentioned earlier, which cause dog chews the muzzle.

There is also no suspended ceiling on the top surface, and the ceiling is uneven, resulting in a rollover site.

Colorful White

Looking at the walls and cabinet doors, they seem to be white, but you can pretend to see it: ah! The colors are different, so ugly.

The picture above is not serious. What I am most afraid of is that the latex paint is white and the cabinet door is yellowish, which makes it look dirty.

② Expensive

If you want to make a beautiful one to the top, there can It\’s

Basic Decoration Part

The ceiling is the cost, the fake wall is the cost, find it, these are all costs!

Do not underestimate these, these are calculated according to flat meters and meters. Easy to give you a little more than tens of thousands of more, just do it around the cabinet, and you have a few thousand yuan.

<span style = \"color: #333333; –tt-darkmode-color: #b3b3b3; Customized add money

The whole house is also very happy, because there are many projects that add money!

board, cabinet door, if you want to increase, you have to use imported, good quality, add money!

The cabinet door. No, you have to use grooves, and add money!

Bouncer, better Yes, because the poor ones are really easy to break, and they cost tens of dollars each. And for the sake of beauty, you have to install a built-in one, and the whole house costs thousands of dollars!

In addition, the visible panels, top sealing panels, and skirting boards mentioned above are built-in , side-mounted closing strips will cost extra!

To make everything perfect, spend tens of thousands more on basic decoration and customization, there must be something

③Continuously \”reconcile\” with yourself during use!

I can afford the effort and money, so it’s no problem? Of course not, because you will find a lot of pitfalls during use, and you can do it. Only by constantly \”reconciling\” with yourself

Bouncer, it’s quite difficult to use…

Looking carefully, it turns out that the rebounder is installed a bit high. After thinking about it again, it won\’t work if it is too low. The layout of the cabinet will have to be sacrificed, so I can only endure it!

As for the questions I worried about at the beginning: How to match the rebounder and hinge to make the door open better? Later you will find that it is not a problem at all!

I spent more money to make the cabinet door deformed…

As soon as I understand it, the effect of the straightener is minimal, and the imported boards are not easy to use as cabinet doors!

The cabinet door is too high. Deformation is almost inevitable, and the plate and straightener only slightly delay the deformation time.

Obviously the cabinet door did not rub against the floor or top at first, but now it does…

In addition to the factors of the cabinet door deformation, there are also downshinks, ceiling sinking, etc. Inspeal that is not resistant!

Even, there are floor telescopic and people step on the floor. These factors.

At the fundamental, it is not convenient to clean it …

Hidden in the cabinet, not only can the mop directly hit the cabinet door because Leave the bottom of the bottom, you will go in a lot of dust, you need to open the door to clean the hygiene below. 333333;-TT-Darkmode-color: #b3b3b3; \”class =\” data-color-tt-darkmode-b3b3b3 \”> Occasionally, I also bumped their feet …

The effect, the cabinet door is within about 1 cm. This distance is just right. Wearing slippers at home, the toes will inevitably have some blood! 91 \”> >

Because of the difference between a door to the top, people also started to think about various new solutions! The old plan is also improving, here are some of them!

> ① Segmentation cabinet

Other practices, and one Keep consistent to the top

Leave a 3cm gap in the middle of the cabinet door, enough space for your fingers to fit in!

Then make a 6cm beam under the hole.

Click, it\’s cheaper!

② finished cabinet to make fun

Fall a approximate height top in advance.

Gypsum board.

<span style = \"color : #333333;-TT-Darkmode-COLOR: #b3b3b3; Stap-paper, then paint

The effect to the top is almost the same.

There is no need to see the light board at all, and there is no need to worry about the sealing and closing bars. Get

③The progress of traditional wardrobe

The traditional wardrobe can also be made according to the details from door to top.

In addition, the distribution of cabinet doors can also be adjusted to make them more coordinated.

Even in terms of functionality, it can be improved to a higher level by directly placing the drawers on the outside for easier access.

In this way, just like the divided wardrobe, the cabinet door does not have to worry about deformation, and the overall price will be much cheaper.

④Closet

In the past two years, the call has been particularly loud, and Xinzhujun did the same in his own home.

It is completely different from the previous customization.

The general approach is to hoist the ceiling first, and then build new walls (also cabinets) and crenels. p>

Then paint, wall cloth, etc. normally.

After that, install Japanese-style folding doors, and the layout inside can be laid out with metal hangers. .

The total cost is actually quite low, maybe a little more expensive than finished cabinets.

The advantage is that the door opening can be very large, so some people also call it a walk-in wardrobe

The internal layout can be very flexible and can be adjusted at any time with the help of metal hangers.

It can also be laid out like a Japanese-style closet, with hanging rods + drawer-type storage boxes.

drawer storage box can adjust the size of the hanging area at any time. The season change is just as simple as moving the box. TT-Origin- web: gif.jpeg? _iz = 58558 & from = Article.pc_detail & LK3S = 953192F4 Hs%3d \”/>

<span style = \"color: #333333; –tt-darkmode-color: #b3b3b3; , Can also be used in ordinary wardrobes, and can also achieve the same purpose. Careful thinking on the ceiling, take the projector cloth cloth Hidden.t-origin-web:gif.jpeg?_iz=58558&from=article.pc_detail&lk3s=953192f4&x-expires=1738293856&x-signature=JmLt1I6UWF9MHkYUC6TwcsGt8fU%3D\”/>

Of course, there is another The issue everyone is concerned about is environmental protection. This product has no formaldehyde and is very environmentally friendly.

Written at the end

I originally planned to just explain it to everyone clearly, but everyone knew the pros and cons of everything in one step. As a result, Shinzumi-kun explained almost everything about cabinets. , the article is quite long, let’s review it at the end

①It looks good from the top to the top;

② To achieve good results through one door, you have to pay attention to many details and increase the budget;

③One course has some inherent shortcomings and acquired disadvantages;

④ You can open your eyes and look at other solutions, such as finished cabinets, traditional wardrobes, split wardrobes, and wall cabinets. They can all surpass one door to the top in terms of practicality. Finally, do Make the right decision for your home.

end

Thank you to everyone who has read this!

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们：609448834