Briefly describe the safety protection device of the industrial promotion door

There are four main types of safety devices for industrial upgrading doors, namely spring breaks protection device, airbag sensor device, steel wire rope fracture protection device, and infrared shooting safety device (optional).

(1) Spring fracture protection device

The twist spring is the balance system of industrial improvement door, it Control the door to keep parallel when running up and down. If the spring is broken by accident, the balance of the industrial door body will be destroyed, causing the door body to fall and major accidents. This device can stuck the balance shaft when the spring breaks, thereby avoiding the door body fall.

(2) Steel wire rope break protection device

Generally speaking, the wire rope will not break, However, the phenomenon of prolapse may occur, and the wire rope will loosen after the disk. In case of this situation, the steel wire rope fracture protection device will clamp the industrial door side rail to prevent the door body from falling and avoid the occurrence of safety accidents.

(3) The airbag sensor device

The airbag is generally installed in Huaxia, Xufengmen Industry Huaxia The edge of the door of the door of the door network, usually the airbags are saturated. During the closure of the door body, once the pressure is encountered, the pressure will cause the gas in the airbags to be squeezed out. At this time The door bounces up immediately under the action of the device to prevent the obstacles from being clamped and causing accidents.

(4) Infrared shooting safety device (optional)

There will be a set of infrared shooting on the body, and a bouquet of infrared beams will be launched. When the door is running down, if the obstacle is blocked, then the beam cannot be connected to a straight line, and the safety protection system will issue instructions to make the door make the door so that the door will make the door make the door make the door so that the door will make the door make the door so that the door will make the door make the door so that the door will make the door make the door so that the door will make the door make the door so that the door will make the door make the door. The automatic rebound runs upwards and goes straight back to the opening state.

Briefly describe the safety protection device of the industrial promotion door

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834

Like (0)
华夏门网的头像华夏门网
Previous 2025年2月5日
Next 2025年2月5日

相关推荐

  • 工業提升門安裝和維修需要用到的登高設備

    工業提升門安裝和維修需要用到的登高設備 廠房的工業提升門安裝和維修都需要用到腳手架,有時候是兩層,有時候是三層,一般來說,三層之內可以解決消防聯動車庫門的數字編號噴繪難題,超出腳手架三層的高度建議用登高車或者舉臂車,然後栓安全繩、戴頭盔進行高空作業,而且不管是租腳手架還是登高車,租賃費用都不低,這也是提升門或者其他工業大門的零售價格比傢用的車庫門較高的原因,…

    提升门 2024年11月1日
    30
  • The structure and principle of industrial lifting doors (industrial sliding doors)

    1. The structure of industrial lifting door The main structure of Qishli industrial lifting door includes door frame, door body and lifting mechanism. Among them, the door frame is…

    提升门 2024年12月13日
    20
  • 选择工业提升门需要考虑哪几个方面?

    选择工业提升门需要考虑哪几个方面? 一、提升方式: 1、标准提升方式:只适合门顶上面空间在200MM或者300MM以内。 2、高位提升方式:大多都是门顶空间在大于300MM小于门洞高度H。 3、垂直提升方式:安装的要求是门顶空间在大于或者等于门洞高度。 4、斜顶提升方式:只要天花斜坡形状的,那么轨道与顶棚成平行状态。 二、工业提升门的各个部件的材质: (1)…

    提升门 2024年6月19日
    50
  • 工业提升门日常的维护与保养

    工业滑升门如果能做好日常的维护将会有效延长使用寿命,所以日常保养与维护更是尤为重要。工业滑升门的日常保养与维护工作分为季度保养和年度保养两种,一般每季度都需要进行一次季度保养,每年需进行一次年度保养。 首先季度保养 检查轨道、门体的外观、有无变形、卡阻现象。检查工业门的控制箱指示讯号是否正常,控制箱体是否完好,手动按钮是否良好,是否能上锁。 开启工业门控制箱…

    提升门 2023年10月2日
    60
  • 翻板式電動提升門最節省空間的安裝方式是反裝

    翻板式電動提升門最節省空間的安裝方法是反裝 當我們按照客戶要求把電動翻板提升門安裝好以後,才發現門不在門洞內側,也不在門框中間,而是裝在瞭門洞外面,更節省空間的是,電動門的導軌直接安裝在屋簷底下,室內隻能看到關閉後的門板。原來,翻板門最節省空間的安裝方式不是中裝和內裝,而是外裝和反裝。 昆明海頓聯袂大廠共同創新的安裝方式,給電動翻板門帶來節省空間的新革命。當…

    提升门 2024年8月25日
    10

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:admin@example.com

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信