Notification: Notes on custom door sets for sanitary rooms

Notification: Health room customization Notes on doors

HJSJ-2024

Hua Construction Engineering and Art Association, China Construction Environment Design Institute issuedNotification No. 7 of 2024: \”The custom door for sanitation rooms will not be placed on the ground Notes\”

The ground in the hygiene room is higher than other grounds20mm low, mainly used to prevent the hydrating water from regurgating outward,And there is a drainage slope in the ground in the hydrating room, so there is a height difference between the inner ground and the outer ground in the hydrating room.

But when measuring the health room, you often ignore this high and low hurdle. , resulting in the custom aluminum alloy door set not being reserved for the internal high and low sash size of the sanitary room, installation After completion, the surface of the door cover is flat, and there is a 10-20mm gap missing inside.

To avoid such low-level errors, designers must be in advance when customizing the hygiene doorBreak the aluminum alloy door dealer to avoid errors.

△ Health room customization door not to be implemented

1.1 There is a 10~20mm gap at the bottom of the sanitary door:

The high and low-level design of the hygiene room was not considered, and the size was not reserved when measuring the size.

1.2 Processing method:

The designer must brief the aluminum alloy door merchant in advance when customizing the hygiene door, reserve enough length, and be in construction. Cut at the right time to avoid errors.