Flipboard car door
Along with our modern economic With continuous development, many courtyards buy private cars, so there is a specific warehouse in each small area. If there is a warehouse, a warehouse will naturally be installed, which can be beneficial for car storage. There are many common types of car doors. The more fashionable one is the flip-top car door, which can be quickly turned off through remote control. Today, the Flying Tengmen Industry will share with the owner the installation tips for flip-flop car doors, come and learn it.
1. Confirm the positive negative difference between the door panel and the door hole size, and then adjust the distance by installing the rail.
2. Note the installation position of left and right springs: Before installing the spring, you need to look at the angles of left and right springs. You must check them from different directions. Note that the springs must have two, and they are all installed in the same On the bracket, the right-hand mounting position is installed on the left side of the spring axle center bracket, and the left-hand mounting is installed on the right side of the spring axle center bracket.
3. Fix the flip-flop door: First, we roll the steel wire into several circles according to the height of the door, generally 6 circles from about 2-2.5, and deliberately loosen the screws on the wheel of the steel wire. Then hang the steel wire and suck it on the wheel, and then remove the steel bar to fix our doors well.
4. Install the car door panel: First, put our door in the closed state, then fix one of its head, then push the adjusting end of the flip door to the fixed end and twist the adjusting flange The screw on it makes it secure and secure, so we are safer and more secure when using it.
5. Install the kitchen door motor: fix the motor at the end of the C rod and connect it to the power supply.
6. Try the warehouse door: Let the vehicle door run at a speed that reaches the user\’s satisfaction.
本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834