Jinan Juguang Fengtian Door has obtained a combination of fast door patents, which facilitates transportation and maintenance after construction is completed.

Finance Industry reported on February 20, 2025 that the information of the National Knowledge and Rights Bureau showed that Jinan Juguang Fengtianmen Co., Ltd. has obtained a patent titled \”a combination fast door\”. Authorization announcement number CN 222501580 U, application date is January 2024.

The patent summary shows that this utility model discloses a combination fast door, involving the field of electric coil door technology, including the main body, the motor and the fast door. The bottom surface of the main body is fixedly installed with the installation block, so An installation cavity is opened in the mounting block, and a through groove is provided at both ends of the mounting block, and a positioning block is slidingly connected in the through groove of the mounting block, and a bar is arranged on one end of the through groove. In this practical new model, the installation block, horn, positioning block and horn bar are installed by retaining notches, so that after the construction is completed, the main body can be transported above the entry point through the foot holder, and then the horn wheel drives and horn wheels are rotated in a smooth manner. The two halves move to move the positioning blocks to extend out of the through grooves and clamp them in the slots that have been reserved in advance. During later maintenance and replacement, the counter-clockwise rotation wheel can bring the positioning blocks to retract and install. In the block, complete the disassembly.

Tianyan Check data shows that Jinan Juguang Fengtianmen Co., Ltd., established in 2012, is located in Jinan City. It is an enterprise mainly engaged in metal products. The enterprise registered capital was RMB 20.01 million, and the actual capital was RMB 9.969 million. Through Tianyan Check data analysis, Jinan Juguang Fengtianmen Co., Ltd. participated in bidding and tendering projects 29 times, had 1 trademark information in terms of intellectual property rights and 40 patent information. In addition, the company also has 2 administrative licenses.

This article comes from the financial world

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834

Like (0)
华夏门网的头像华夏门网
Previous 2025年2月21日
Next 2025年2月21日

相关推荐

  • 不同的快速门减尺不同

    快速门   我们定做快速门前,需要先量洞口尺寸,有时是客户自己量,多数是快速门销售商上门量。而在量尺时,有个问题需要注意,就是门体减尺问题。安装家庭进户门都有减尺,说的是门扇尺寸要比门洞尺寸小,因为有门套厚度和安装时要留缝打密封胶,而门洞和门扇之间较小的尺寸就是减尺。同理,快速门也有减尺。而不同类型的快速门和实际安装情况不同,减尺情况也不同。   1、快速卷…

    快速门 2023年10月27日
    50
  • Underground garage rapid door

    Underground garage fast door is a new type of door control system, mainly used to control the entry and exit of vehicles and the safety of the garage. It usually uses high-speed do…

    快速门 2024年12月22日
    40
  • Guangzhou Taiwei Machinery has obtained a dual-opening activity door patent, and can quickly and stably open activity doors.

    Finance Industry February 24, 2025, information from the National Knowledge and Rights Bureau showed that Guangzhou Taiwei Machinery Co., Ltd. has obtained a patent titled \”…

    快速门 2025年2月25日
    20
  • pvc快速门让冲压车间环境再上一个等级

    冲压成形工艺在汽车车身制造工艺中占有重要的地位,特别是汽车车身的大型覆盖件,有的是空间曲面对表面质量要求高,加工中需要进行封闭式生产环境,所以车间用门通常都会选用密封好的pvc快速门,安装这种产品对车间都有哪方面提升,下面我详细介绍一下,方便大家了解。 冲压车间安装pvc快速门的环境提升 1、在进行补焊、打磨时,要减少焊条烟雾以及打磨粉尘,补焊时会产生大量的…

    快速门 2023年10月6日
    30
  • Hard fast door

    Hard fast door application site Hard fast door——A new type of metal industrial door that is fast, energy-saving, sealed, efficient, wind-resistant, and environmentally friendly. It…

    快速门 2024年12月22日
    10

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:admin@example.com

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信